IEI Technology HYPER-RK39 User Manual Download Page 64

Page: 64 / 75

HYPER-RK39 SBC

Page 54

The HYPER-RK39 may come with Ubuntu 16.04 OS pre-installed. This chapter introduces

the user interface and basic functions of Ubuntu OS installed in the HYPER-RK39.

6.1 Desktop

Figure 4-1: Ubuntu Desktop

Panel

It is used for starting and switching applications and for receiving information

about the system. It includes:

- Clock: displays the date and time.

- Notification Area: contains indicators which provide system information,

including network connectivity, power management and system settings.

The position of the panel, the items it contains and the Menu are all

customizable by right-clicking on the Panel and select Panel

→

Panel

Preferences.

Menu Button

Clicking on the menu button will open the Menu, offering many choices of

applications. (See the following section for details.)

Desktop

The default desktop has just three icons on it: Home (where all personal data

are stored), File System (which is the root of the filesystem) and Trash. The

desktop can be customized by right-clicking in a blank area and choosing

Desktop Settings.

Summary of Contents for HYPER-RK39












































































Search results

Summary of Contents for HYPER-RK39

Reviews:

IEI Technology HYPER-RK39, User Manual, Page: 64 / 75

Search results

Summary of Contents for HYPER-RK39

Reviews: