IEI Technology HYPER-RK39, User Manual, Page: 47 / 75

HYPER-RK39 SBC
Page 37
WARNING:
The installation instructions described in this manual should be carefully
followed in order to prevent damage to the HYPER-RK39, components and
injury to the user.
Before and during the installation please DO the following:

Read the user manual:
o
The user manual provides a complete description of the HYPER-RK39
installation instructions and configuration options.

Wear an electrostatic discharge cuff (ESD):
o
Electronic components are easily damaged by ESD. Wearing an ESD cuff
removes ESD from the body and helps prevent ESD damage.

Place the HYPER-RK39 on an antistatic pad:
o
When installing or configuring the motherboard, place it on an antistatic
pad. This helps to prevent potential ESD damage.

Turn all power to the HYPER-RK39 off:
o
When working with the HYPER-RK39, make sure that it is disconnected
from all power supplies and that no electricity is being fed into the system.
Before and during the installation of the HYPER-RK39:

DO NOT remove any of the stickers on the PCB board. These stickers are
required for warranty validation.

DO NOT use the product before verifying all the cables and power connectors
are properly connected.

DO NOT allow screws to come in contact with the PCB circuit, connector pins,
or its components.