IEI Technology F10B-BT, User Manual

Page: 62 / 132

PPC-F08B/F10B-BT Panel PC
Page 48
WARNING:
Using incorrectly specified SO-DIMM may cause permanently damage the
PPC-F08B/F10B-BT. Please make sure the purchased SO-DIMM complies
with the memory specifications of the PPC-F08B/F10B-BT.
To replace a SO-DIMM into a SO-DIMM socket, please follow the steps below.
Step 1: Remove the back cover by removing the retention screws. See Section 3.5 .
Step 2: Locate the SO-DIMM. ( Figure 4-1 ).
Figure 4-1: SO-DIMM Location
Step 3: Release the arms on the SO-DIMM socket to remove the SO-DIMM.
Step 4: Align the notch on the memory with the notch on the memory socket. Insert the
SO-DIMM in at a 20º angle. ( Figure 4-2 ).
Step 5: Push the SO-DIMM downwards until the arms of the SO-DIMM socket clip into
place and secure the SO-DIMM in the socket ( Figure 4-2 ).