IEI Technology eKINO-945GSE, Quick Installation Manual

Page: 5 / 13

5
PCN1
Battery Module Connector (eKINO-945GSE-N270UPS
only)
J11
10M MCU LAN Connector (eKINO-945GSE-N270UPS
only)
IDE1 IDE Connector
PIN DESCRIPTION
1-2 Normal (Default)
2-3 Clear CMOS Setup
J_CMOS1 : Clear CMOS Setup
(1*3 pin header, pitch 2.00mm)
PIN DESCRIPTION
1-2 3.3V (Default)
2-3 5V
J_VLVDS1 : LCD Voltage Setup
(1*3 pin header, pitch 2.00mm)
PIN DESCRIPTION
Open ATX
Short AT (Default)
ATXCTL1 : Power On Mode Setup
(1*2 pin header, pitch 2.00mm)
PIN DESCRIPTION
Open Slave (Default)
Short Master
J_CF1 : CF Card Master / Slave Setup
(1*2 pin header, pitch 2.00mm)
PIN DESCRIPTION
1-2 UPS (Default)
2-3 Battery
J_U/B1 : UPS / Battery Mode Setup
(1*3 pin header, pitch 2.00mm)
PIN DESCRIPTION
1-2 RS-232(Default)
3-4 RS-422
5-6 RS-485
JP1 : COM3 RS-232& RS-422/485
Type Select(2*3 pin header, pitch
2.00mm)
PIN DESCRIPTION
Open
Disable Battery function
(Default)
Short Enable Battery function
JP3 : UPS Terminal Switch
(1*2 pin header, pitch 2.00mm)
PIN DESCRIPTION PIN DESCRIPTION
1 TX_422- 2 RX_422-
3 4
5 D_485+ 6 D_485-
JP2 : COM3 RS-422/485
(2*3 pin header, pitch 2.00mm)