IEI Technology eKINO-945GSE, Quick Installation Manual

Page: 4 / 13

4
Connector /Jumper List
LABEL FUNCTION
J_CMOS1 CMOS state setting jumper
J_VLVDS1 LCD Voltage Selector jumper
ATXCTL1 Power on mode setup(eKINO-945GSE-N270 only)
J_CF1 CF Card Master/Slave setting jumper
J_U/B1 UPS & BATTERY setting (eKINO-945GSE-N270UPS only)
JP1 RS-232/422/485 Mode jumper
JP3 UPS Terminal Switch (eKINO-945GSE-N270UPS only)
JP2 COM3 RS-422/485 connector
USB1 Internal USB Connector
MS/KB1 PS/2 MOUSE & KEYBOARD Connector
J_LCD_TYPE1 LVDS Panel Re solution Selection jumper
F_PANEL1
PWR,RST Buttons,Indicators and Speaker
J2 CF Card Slot
VIDEO1 VGA 15-pin Female Connector & DVI-D Connector
LAN/USB1
LAN/USB2
RJ-45 LAN and USB Connectors
LVDS1 LVDS Panel Connector
COM1 External 2 Ports Serial Port DB-9 Connectors (RS-232)
AUDIO1 Audio Connector (Line out/MIC in)
PWR1 ADAPTER IN Connector (9V~28V Input)
CN2 Power Input Connector
DIO1 Digital I/O Connector
J1 Fan Connector
PW1,PW2 Serial ATA Device Power Connectors
IR1 Infrared Interface Connector
COM3
Internal Serial Port Connector
(RS-232/422/485,RS-422/485 in JP2)
COM4 Internal Serial Port Connector (RS-232)
SATA1,SATA2 Serial ATA Connectors
INVERTER1
LVDS Panel Voltage Supply Connector
SPDIF1 SPDIF Connector
MCU1 MCU Flash Connector (eKINO-945GSE-N270UPS only)
J3 LED Indicator Connector(eKINO-945GSE-N270UPS only)
TV1 HDTV Out Connector
BRIGHTNESS
LCD Brightness Control Connector
(eKINO-945GSE-N270UPS only)
BT1 Battery Connector