IEI Technology ECW-281B-D525, User Manual

Page: 55 / 107

ECW-281B/B2-D525 Embedded System
Page 43
Step 2:
Carefully mark the locations of the four bracket screw holes on the wall.
Step 3:
Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4:
Align the wall-mounting bracket screw holes with the pilot holes.
Step 5:
Secure the mounting-bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them (
64
Figure 4-12
).
Figure 4-12: Wall-mounting Bracket
Step 6:
Insert the four monitor mounting screws provided in the wall mounting kit into the
four screw holes on the bottom panel of the system and tighten until the screw
shank is secured against the bottom panel (760H760H
4
Figure 4-13).
Step 7:
Align the mounting screws on the ECW-281B/B2-D525 bottom panel with the
mounting holes on the bracket.
Step 8:
Carefully insert the screws through the holes and gently pull the monitor
downwards until the ECW-281B/B2-D525 rests securely in the slotted holes
(
764
Figure 4-13
). Ensure that all four of the mounting screws fit snuggly into their
respective slotted holes.