IEI Technology ECW-281B-945GSE User Manual Download Page 26

Page: 26 / 167

ECW-281B Embedded System

Page 10

2.1 ECW-281B-945GSE Mechanical Overview

The ECW-281B-945GSE RoHS compliant, Intel® Atom™ fanless embedded system

features industrial grade components that offer longer operating life, high shock/vibration

resistance and endurance over a wide temperature range. The ECW-281B-945GSE

combines these features in an aluminum enclosure designed for space critical

applications that require low power consumption. Featuring two LAN, four USB, six serial

communication ports, as well as audio, and VGA, the ECW-281B-945GSE offers system

integrators and developers the best selection of robust and high performance computing

system platforms. An internal bracket supports one 2.5” SATA hard drives.

2.2 Physical Dimensions

The physical dimensions of the ECW-281B-945GSE embedded systems are listed below.

2.2.1 ECW-281B-945GSE Dimensions

The dimensions of the ECW-281B-945GSE are listed below and shown in

Figure 2-1

Height

: 64.00 mm

Width

: 229.00 mm

Length

: 132.00 mm

Summary of Contents for ECW-281B-945GSE








































































































































































Search results

Summary of Contents for ECW-281B-945GSE

Reviews:

Related manuals for ECW-281B-945GSE

Brands by name

Popular brands

IEI Technology ECW-281B-945GSE, User Manual

Search results

Summary of Contents for ECW-281B-945GSE

Reviews:

Related manuals for ECW-281B-945GSE

Brands by name

Popular brands