IEI Technology ECW-281B-945GSE User Manual Download Page 151

Page: 151 / 167

ECW-281B Embedded System

Page 135

The interior of the ECW-281B-945GSE does not require cleaning. Keep fluids

away from the ECW-281B-945GSE interior.

Be cautious of all small removable components when vacuuming the

ECW-281B-945GSE.

Turn the ECW-281B-945GSE off before cleaning the ECW-281B-945GSE.

Never drop any objects or liquids through the openings of the

ECW-281B-945GSE.

Be cautious of any possible allergic reactions to solvents or chemicals used

when cleaning the ECW-281B-945GSE.

Avoid eating, drinking and smoking within vicinity of the ECW-281B-945GSE.

A.2.2 Cleaning Tools

Some components in the ECW-281B-945GSE may only be cleaned using a product

specifically designed for the purpose. In such case, the product will be explicitly mentioned

in the cleaning tips. Below is a list of items to use when cleaning the ECW-281B-945GSE.



Cloth

– Although paper towels or tissues can be used, a soft, clean piece of cloth is

recommended when cleaning the ECW-281B-945GSE.

Water or rubbing alcohol

– A cloth moistened with water or rubbing alcohol can be

used to clean the ECW-281B-945GSE.

Using solvents

– The use of solvents is not recommended when cleaning the

ECW-281B-945GSE as they may damage the plastic parts.

Vacuum cleaner

– Using a vacuum specifically designed for computers is one of the

best methods of cleaning the ECW-281B-945GSE. Dust and dirt can restrict the

airflow in the ECW-281B-945GSE and cause its circuitry to corrode.

Cotton swabs

- Cotton swaps moistened with rubbing alcohol or water are excellent

tools for wiping hard to reach areas.

Foam swabs

- Whenever possible, it is best to use lint free swabs such as foam swabs

for cleaning.

Summary of Contents for ECW-281B-945GSE








































































































































































Search results

Summary of Contents for ECW-281B-945GSE

Reviews:

Related manuals for ECW-281B-945GSE

Brands by name

Popular brands

IEI Technology ECW-281B-945GSE, User Manual

Search results

Summary of Contents for ECW-281B-945GSE

Reviews:

Related manuals for ECW-281B-945GSE

Brands by name

Popular brands