IEI Technology ECN-780-Q67, User Manual

Page: 154 / 184

ECN-780-Q67 Em b e d d e d S ys te m
P a g e 141
S te p 12: The recovery tool main menu window is shown as below. Press any key to
reboot the system. Step 0 :
Figure C-21: Press Any Key to Continue
C.3 Au to Re c o ve ry S e tu p P ro c e d u re
The auto recovery function allows a system to automatically restore from the factory
default image after encountering a Blue Screen of Death (BSoD) or a hang for around 10
minutes. To use the auto recovery function, follow the steps described in the following
sections.
CAUTION:
The setup procedure may include a step to create a factory default
image. It is suggested to configure the system to a factory default
environment before the configuration, including driver and application
installations.
S te p 1:
Follow the steps described in Section C.2.1 ~ Section C.2.3 to setup BIOS,
create partitions and install operating system.
S te p 2:
Install the auto recovery utility into the system by double clicking the
Utility/AUTORECOVERY-SETUP.exe in the One Key Recovery CD. This utility
MUST be installed in the system, otherwise, the system will automatically
restore from the factory default image every ten (10) minutes.