IEI Technology DRPC-W-TGL Series, User Manual

Page: 29 / 155

DRPC-W-TGL
Page 14
3.2 Cover Removal
Before installing or maintaining the internal components, the cover must be removed from
the DRPC-W-TGL Series. Follow the steps below to complete the task.
Step 1:
Loosen the 6 screws on the cover.
Step 2:
Take off the cover (Figure 3-1).
Figure 3-1
:
Remove the Cover
3.3 Hard Disk Bracket Removal
Loosen the four screws and remove the hard disk bracket (Figure 3-2).
Figure 3-2: Take out the Disk Bracket
3.4 Storage Installation
The DRPC-W-TGL Series supports two types of storage, one M.2 B Key & one 2.5" SSD