IEI Technology DRPC-W-TGL Series, User Manual

Page: 31 / 155

DRPC-W-TGL
Page 16
Step 4:
Secure the M.2 module with the previously removed retention screw (Figure 3-5).
Figure 3-5: Securing the M.2 Module
3.5 Wi-Fi Module Installation (Optional)
The Wi-Fi module is an optional accessory. You can purchase it from IEI or other
providers. Note that you have to purchase Wi-Fi module, internal antenna and external
antenna. It is suggested to purchase an internal antenna longer than 200mm.
To install the Wi-Fi module, follow the steps below.
Step 1:
Locate the M.2 A Key module slot.
Step 2:
Remove the retention screw secured on the motherboard.
Step 3:
Line up the notch on the WLAN module with the notch on the slot. Slide the WLAN
module into the slot at an angle of about 20º (Figure 3-6).
Figure 3-6: Inserting the WLAN Module
Step 4:
Secure the WLAN module with the retention screw previously removed (Figure
3-7).