IEI Technology DRPC-W-TGL Series, User Manual

Page: 23 / 155

DRPC-W-TGL
Page 8
2.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during installation may result in
permanent damage to the DRPC-W-TGL Series and severe injury to
the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the DRPC-W-TGL Series. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the DRPC-W-TGL Series or any other electrical
component is handled, the following anti-static precautions are strictly adhered to.
▪
Wear an anti-static wristband : Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
▪
Self-grounding : Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
▪
Use an anti-static pad : When configuring the DRPC-W-TGL Series, place it
on an antic-static pad. This reduces the possibility of ESD damaging the
DRPC-W-TGL Series.
2.2 Unpacking Precautions
When the DRPC-W-TGL Series is unpacked, please do the following:
▪
Follow the anti-static precautions outlined in Section 2.1 .
▪
Make sure the packing box is facing upwards so the DRPC-W-TGL Series
does not fall out of the box.
▪
Make sure all the components shown in Section 2.2 are present.