IEI Technology DRPC-242-ADL-P Series, User Manual

Page: 34 / 167

DRPC-242-ADL-P
Page 18
3.2 Back Cover Removal
Before installing or maintaining the internal components, the cover must be removed from
the DRPC-242-ADL-P Series. Follow the steps below to complete the task.
Step 1:
Loosen the 5 screws on the top cover.
Step 2:
Take off the back cover (Figure 3-1).
Figure 3-1
:
Remove the Cover
3.3 HDD Disk Bracket Removal
The HDD bracket must be removed first before installing a hard disk or M.2 modules.
Step 1:
Remove the 3 screws on the side panels.
Step 2:
Remove the HDD bracket as indicated by the arrows in Figure 3-2.