IEI Technology DRPC-230-ULT5 Series User Manual Download Page 60

Page: 60 / 117

DRPC-230-ULT5 Embedded System

Page 50

5.3.3 Trusted Computing

Use the

Trusted Computing

menu (

BIOS Menu 6

) to configure settings related to the

Trusted Computing Group (TCG) Trusted Platform Module (TPM).

Advanced

Configuration

Security Device Support

[Disable]

NO Security Device Found

Enables or Disables BIOS
support for security
device. O.S. will not
show Security Device.
TCG EFI protocol and
INT1A interface will not
be available.

----------------------



: Select Screen

↑

↓

: Select Item

Enter: Select
+/-: Change  Opt.
F1:  General Help
F2:  Previous Values
F3:  Optimized Defaults
F4:  Save & Exit
ESC: Exit

BIOS Menu 6: Trusted Computing



Security Device Support [Disable]

Use the

Security Device Support

option to configure support for the TPM.



Disable D

EFAULT

TPM support is disabled.



Enable

TPM support is enabled.

Summary of Contents for DRPC-230-ULT5 Series






















































































































Search results

Summary of Contents for DRPC-230-ULT5 Series

Reviews:

Related manuals for DRPC-230-ULT5 Series

Brands by name

Popular brands

IEI Technology DRPC-230-ULT5 Series, User Manual

Search results

Summary of Contents for DRPC-230-ULT5 Series

Reviews:

Related manuals for DRPC-230-ULT5 Series

Brands by name

Popular brands