IEI Technology DRPC-120-BT, User Manual

Page: 36 / 121

DRPC-120-BTi Embedded System
Page 24
3.7 AT/ATX Mode Selection
AT and ATX power modes can both be used on the DRPC-120-BTi. The selection is made
through an AT/ATX switch on the top panel as shown below (
Figure 3-9
).
Figure 3-9: AT/ATX Switch Location
3.8 Mounting the System
The DRPC-120-BTi embedded system can be mounted onto a DIN rail. Follow the steps
below to complete the task.
Step 1:
Attach the supplied DIN rail mounting bracket to the rear panel of the embedded
system. Secure the bracket to the embedded system with three retention screws
(
74
Figure 3-10
).
Figure 3-10: DIN Rail Mounting Bracket Installation