IEI Technology DM-150GS/R-R30, User Manual

Page: 48 / 97

DM S e rie s Mo n ito r
P a g e 38
S te p 4: Insert the panel mounting clamps into the pre-formed holes along the edges of
the monitor, behind the metal frame. Refer to the mounting kit packing list for the
required number of mounting clamps.
Figure 5-12: Panel Mounting Clamp Position
S te p 5: Tighten the screws that pass through the panel mounting clamps until the plastic
caps at the front of all the screws are firmly secured to the panel ( Figure 5-12 ).
5.5.2 Ca b in e t a n d Ra c k In s ta lla tio n
Each model of the DM series LCD monitor has a series of holes located on the rear of the
front panel for mounting the monitor to a rack or cabinet.
NOTE:
1. The DM-190 monitor requires two special mounting brackets for installation
into a rack or cabinet. Refer to Section 5.5.2.2 for details.