IEI Technology AFL3-W15C-ADLP, User Manual

Page: 112 / 156

AFL3-W15C/W19C/W22C-ADLP
Page 96
5.3 Turn off the Power
WARNING:
Failing to turn off the system before opening it can cause permanent
damage to the system and serious or fatal injury to the user.
Before any maintenance procedures are carried out on the system, make sure the system
is turned off.
5.4 SO-DIMM Module Replacement
The AFL3-W15C/W19C/W22C-ADLP has one SO-DIMM module installed. To replace the
SO-DIMM module, follow the instructions below.
Step 1: Follow all anti-static procedures. See Section 5.2 .
Step 2: Turn off the power. See Section 5.3.
Step 3: Remove the plastic back cover and the internal aluminum cover. See Section 3.4
above.
Step 4: Locate the SO-DIMM module (Figure 5-1).