IEI Technology AFL3-W15C-ADLP, User Manual

Page: 113 / 156

AFL3-W15C/W19C/W22C-ADLP
Page 97
Figure 5-1:
SO-DIMM module Location
Step 5: Remove the DDR4 memory module by pulling both the spring retainer clips
outward from the socket.
Step 6: Grasp the DDR4 memory module by the edges and carefully pull it out of the
socket.
Step 7: Install the new DDR4 memory module by pushing it into the socket at a 20º angle
( Figure 5-2 ).
Step 8: Gently push the memory module downwards and the arms clip into place ( Figure
5-2 ).