IEI Technology AFL3-W15B-H81 User Manual Download Page 68

Page: 68 / 138

AFL3-W15B-H81 Panel PC

Page 54

Disabled

Disables the Intel Hyper-Threading Technology.

Enabled D

EFAULT

Enables the Intel Hyper-Threading Technology.

Active Processor Cores [All]

Use the

Active Processor Cores

BIOS option to enable numbers of cores in the

processor package.

All

EFAULT

Enable all cores in the processor package.

Enable one core in the processor package.

Intel Virtualization Technology [Disabled]

Use the

Intel Virtualization Technology

option to enable or disable virtualization on the

system. When combined with third party software, Intel® Virtualization technology allows

several OSs to run on the same system at the same time.

Disabled D

EFAULT

Disables Intel Virtualization Technology.

Enabled

Enables Intel Virtualization Technology.

EIST [Enabled]

Use the

EIST

option to enable or disable the Enhanced Intel® SpeedStep Technology (EIST).

Disabled

Disables Enhanced Intel® SpeedStep Technology

Enabled D

EFAULT

Enables Enhanced Intel® SpeedStep Technology

Summary of Contents for AFL3-W15B-H81











































































































































Search results

Summary of Contents for AFL3-W15B-H81

Reviews:

IEI Technology AFL3-W15B-H81, User Manual, Page: 68 / 138

Search results

Summary of Contents for AFL3-W15B-H81

Reviews: