IEI Technology AFL3-W15B-H81, User Manual

Page: 34 / 138

AFL3-W15B-H81 Panel PC
Page 20
Step 2:
Slide the back cover toward the I/O panel until it is disengaged from the locking
mechanism. Then, lift the back cover off the chassis.
Figure 3-2: Removing the Back Cover
Step 3:
To install the back cover, slide the back cover toward the top cover until the
external and internal locking mechanisms are both clipped into place. Then,
secure the back cover with the previously removed screws.
WARNING:
Over-tightening back cover screws will crack the plastic frame.
Maximum torque for cover screws is 5 kg-cm (0.36 lb-ft/0.49 Nm).
3.5 HDD Installation
To install the HDD into the AFL3-W15B-H81, please follow the steps below:
Step 1:
Remove the back cover. Refer to
Section 3.4
.
Step 2:
Remove the four HDD bracket retention screws and lift the HDD bracket off the
panel PC.