IEI Technology AFL3-W10A-AL User Manual Download Page 83

Page: 83 / 145

AFL3-W10A/12A/W15A-AL Panel PC

Page 69



EIST [Enabled]

Use the

EIST

option to enable or disable the Intel

Speed Step Technology.



Disabled

Disables the Intel

Speed Step Technology.



Enabled

EFAULT

Enables the Intel

Speed Step Technology.



C-States [Disabled]

Use the

C-States

option to enable or disable the C-states.



Disabled D

EFAULT

Disables the C-state



Enabled

Enables the C-state



Intel Virtualization Technology [Disabled]

Use the

Intel Virtualization Technology

option to enable or disable virtualization on the

system. When combined with third party software, Intel

Virtualization technology allows

several OSs to run on the same system at the same time.



Disabled

EFAULT

Disables Intel

Virtualization Technology.



Enabled

Enables Intel

Virtualization Technology.



VT-d [Disabled]

Use the

VT-d

BIOS option to enable or disabled VT-d support.



Disabled D

EFAULT

Disable VT-d support.



Enabled

Enable VT-d support.

Summary of Contents for AFL3-W10A-AL


















































































































































Search results

Summary of Contents for AFL3-W10A-AL

Reviews:

Related manuals for AFL3-W10A-AL

Brands by name

Popular brands

IEI Technology AFL3-W10A-AL, User Manual

Search results

Summary of Contents for AFL3-W10A-AL

Reviews:

Related manuals for AFL3-W10A-AL

Brands by name

Popular brands