IEI Technology AFL3-W07A-AL, User Manual

Page: 31 / 114

AFL3-W07A-AL Panel PC
Page 19
3.6 Mounting the System
The methods of mounting the AFL3-W07A-AL are listed below.

Wall mounting

Panel mounting

Rack mounting

Arm mounting

Stand mounting

V-Stand mounting
The mounting methods are described below.
3.6.1 Wall Mounting
To mount the flat bezel panel PC onto the wall, please follow the steps below.
Step 1:
Select the location on the wall for the wall-mounting bracket.
Step 2: Carefully mark the locations of the four screw holes in the bracket on the wall.
Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4: Align the wall-mounting bracket screw holes with the pilot holes.
Step 5:
Secure the mounting-bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them ( Figure 3-6 ).