IEI Technology AFL3-12A-AL, User Manual

Page: 39 / 145

AFL3-W10A/12A/W15A-AL Panel PC
Page 25
Figure 3-6: M.2 Slot Location
Step 3: Line up the notch on the M.2 SSD with the notch on the connector. Slide the M.2
SSD into the socket at an angle of about 20º ( Figure 3-7 ).
Step 4:
Secure the M.2 SSD with the retention screw. Push the other end of the M.2
SSD down and secure the card with the previously removed retention screw
( Figure 3-7 ).
Figure 3-7: M.2 SSD Installation
Step 5: IMPORTANT! Attach the thermal pad come with the system onto the SSD
module. The sticky side must face down.
Step 6: Reinstall the back cover and secure it using the retention screws. Step 0: