IEI Technology AFL2-W21A/AB-H61 SERIES, User Manual

Page: 65 / 262

AFL2-W21A/AB-H61
P a g e 46
S te p 4: Connect the RFID connector of the RFID USB cable to the RFID connector on
the motherboard (RFID_USB1).
S te p 5:
Attach the sticker of the RFID module to the bottom of the panel.
Figure 4-8: Install the RFID module
S te p 6: Secure the RFID module to the motherboard using two retention screws on
either side.
S te p 7: Use the RFID reader to read a RFID card.
4.7 DVD-ROM In s ta lla tio n (Op tio n a l)
To install a DVD-ROM, please follow the steps below.
S te p 1: Remove the DVD-ROM bracket from the AFL2-W21A/AB-H61. ( Figure 4-9 ).
Figure 4-9: DVD-ROM Bracket