IEI Technology AFL2-W19A-H61 Series User Manual Download Page 144

Page: 144 / 279

AFL2-W19A/AB-H61

P a g e 124

S te p 12:

Replace the internal aluminum cover and secure it to the chassis using seven (7)

retention screws.

S te p 13:

Replace the back cover and secure it using fourteen (14) previously removed

retention screws.

S te p 0:

7.6

Re in s ta llin g th e Co ve rs

WARNING:

Failing to reinstall the covers may result in permanent damage to the

system. Please make sure all coverings are properly installed.

When maintenance procedures are complete, please make sure all the covers are

replaced, including the following:



Aluminum internal cover



Plastic back cover

Summary of Contents for AFL2-W19A-H61 Series
























































































































































































































































































Search results

Summary of Contents for AFL2-W19A-H61 Series

Reviews:

Brands by name

Popular brands

IEI Technology AFL2-W19A-H61 Series, User Manual

Search results

Summary of Contents for AFL2-W19A-H61 Series

Reviews:

Brands by name

Popular brands