IEI Technology AFL2-12A-HM65/PC-R15, User Manual

Page: 59 / 141

AFL2-12A-HM65 Series Panel PC
Page 45
Figure 4-21: Ethernet Connector
Follow the steps below to connect a serial device to the RJ-45 serial port connector of the
AFL2-12A-HM65 panel PC.
Step 1: Locate the RJ-45 serial port . The location of the RJ-45 serial port is shown
in Figure 1-6 .
Step 2: Connect the RJ-45 to COM port cable to the panel PC . Insert the RJ-45
connector end of cable into the RJ-45 serial port. See Figure 4-22 .
Step 3: Connect the serial device. Connect a serial device to the D-sub 9 connector
end of the cable. See Figure 4-22 .
Figure 4-22: RJ-45 Serial Port Connector
Step 4: Secure the connector . Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector.