IEI Technology AFL-xxx-CX2, User Manual

Page: 70 / 201

AFL-xxx-CX2 Panel PC
Page 52
Figure 3-7: AFL-12B-CX2 Bracket Retention Screws
Step 4: Attach the hard drive bracket to the hard drive. To do this, align the four retention
screw holes in the both sides of the hard drive bracket with the retention screw
holes on the sides of the hard drive. Insert four retention screws into the hard
drive bracket ( Figure 3-8 ).
Figure 3-8: AFL-xxx-CX2 Hard Drive Retention Screws
Step 5: Connect the SATA/IDE cable to the rear of hard drive.