manualshive.com logo in svg

IEI Technology AFL-317AB(W)-945, User Manual

Share
Download
IEI Technology AFL-317AB(W)-945 User Manual Download Page 6

 

 

AFOLUX AFL-317A Series Panel PC

Page vi 

 Packing List 

 

NOTE: 

If any of the components listed in the checklist below are missing, 

please do not proceed with the installation. Contact the IEI reseller or 

vendor you purchased the AFOLUX AFL-317A series from or contact 

an IEI sales representative directly. To contact an IEI sales 

representative, please send an email to 

[email protected]

. 

The items listed below should all be included in the AFOLUX AFL-317A series package. 

 1 

x 

AFOLUX 

AFL-317A 

  1 x Power adapter 

  1 x Power cord 

  1 x Screw kit 

  2 x Camera brackets for camera angle changing 

  1 x 2.5” HDD support bracket 

  1 x User manual CD and driver CD 

  1 x Touch pen 

Images of the above items are shown in 

Chapter 3 

on 

page 28

.  

Summary of Contents for AFL-317AB(W)-945









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands