IEI Technology AFL-17D, User Manual, Page: 122 / 151

AFL-W19A/W19B/17D/W15A-GM45 Panel PC
Page 111
ƒ Partition 1:
/
ƒ Partition 2:
SWAP
NOTE:
Please reserve enough space for partition 3 for saving recovery
images.
Figure C-30: Partitions for Linux
Step 3: Create a recovery partition
. Insert the recovery CD into the optical disk drive.
Follow
Step 1
~
Step 3
described in
Section
76
C.2.2
. Then type the following
commands (marked in red) to create a partition for recovery images.
system32> diskpart
DISKPART> list vol
DISKPART> sel disk 0
DISKPART> create part pri size= ___
DISKPART> assign letter=N
DISKPART> exit
system32> format N: /fs:ntfs /q /v:Recovery /y
system32> exit
Step 4: Build-up recovery partition
. Press any key to boot from the recovery CD. It will
take a while to launch the recovery tool. Please be patient. When the recovery
tool setup menu appears, type <
3
> and press <Enter> (
76
Figure C-31
). The
Symantec Ghost window appears and starts configuring the system to build-up a