IEI Technology AFL-15C-9652 User Manual Download Page 115

Page: 115 / 199

Page 97

located on the upper left-hand corner of the 10-key pad. The

Number Lock LED on the keyboard lights up when the Number

Lock is engaged.

On D

EFAULT

Allows the Number Lock on the keyboard to be enabled

automatically when the computer system boots up. This allows

the immediate use of the 10-key numeric keypad located on

the right side of the keyboard. To confirm this, the Number

Lock LED light on the keyboard is lit.

6.5.2 Boot Device Priority

Use the

Boot Device Priority

menu (

BIOS Menu 19

) to specify the boot sequence from

the available devices. Possible boot devices may include:

USB

HDD

CD/DVD

Summary of Contents for AFL-15C-9652








































































































































































































Search results

Summary of Contents for AFL-15C-9652

Reviews:

Related manuals for AFL-15C-9652

Brands by name

Popular brands

IEI Technology AFL-15C-9652, User Manual

Search results

Summary of Contents for AFL-15C-9652

Reviews:

Related manuals for AFL-15C-9652

Brands by name

Popular brands