- 16 -
6.3.
If reception is unstable
Signal reception may be affected by the position, height and angle of
placement. If reception is not stable, please look for the best condition by
adjusting the location, height, and other environmental variables.
When CW-5HD TX and RX are used close to each other, the received signal
becomes too strong and may disturb the video signal. When they are placed
close to each other (less than 3m as an example), set the POWER MODE
switch of CW-5HD TX to LOW.
6.4.
Back-up power failure function
When an external power supply is used, power failure can be avoided by
mounting an IDX ENDURA battery to CW-5HD at the same time. If the
external power supply fails, use can continue via battery power. Depending on
certain conditions, video quality may be momentarily affected.
6.5.
Power through function
When the CW-5HD is used with ENDURA batteries, the power supply to the
video camera, monitor, etc. will not stop even when the CW-5HD power switch
is turned off.
If the CW-5HD is not actually required for transmission it can remain on the
video source and turned off. The power from the attached battery will still
power the device even though the CW-5HD is turned off, saving battery
consumption.
