IDX CW-1dx, Instruction Manual

Page: 21 / 36

D
ETAILS OF SETTING
M
ENU OF
TX
Software Version
It indicates a software version of the TX’s ENC (Encoder module).
IP ETHADDR
Setting value
XXX.XXX.XXX.XXX
It indicates IP address setup. Factory setting as Default ENC: 192.168.110
GROUP
Setting value
2222
This value only be used upon repair or maintenance purpose.
*Please do not change the value unless instructed by the manufacturer.
Point To Point HDMI Bitrate
Setting value
1000-25000
It indicates HDMI Video transmission encoding bitrate setting of the
transmitter (TX). The default setting is at 15000Kbps (15Mbps).
The setting value can be changed from 1Mbp to 25Mbps, but the
recommended value is the default setting of 15Mbps which optimizes the
relationship between bitrate and transmission stability.
When changing the bitrate value, please make sure to input in units of 1000.
Please note that not all bitrate values can be guaranteed.
Point To Point RTSP Bitrate
Setting value
1000-15000
It indicates RTSP Video transmission encoding bitrate setting of the
transmitter (TX). The default setting is at 5000Kbps (5Mbps). The setting value
can be changed from 1Mbp to 15Mbps. When changing the bitrate value,
please make sure to input in unit of 1000.
20