Instruction Manual
1 Remove the front grill, disconnect the terminals and then hide
the terminals in the door’s reserved hole.
2 Remove the right upper hinge and bottom door limit,then
remove the door.
3 Take out the torsion rod from the upper right of the
door.
4 Fish out the wiring from door’s reserved hole, the
wiring stretches out from the upper right of door.
5 Insert the torsion rod into corresponding holes on
bottom right of the door.
6 Rotate the door clockwise 180°, so the wiring is
stretching out from the bottom left of the door.
7 Remove the hinge axis from the right bottom hinge,
inert it into the left bottom hinge.
DOOR REVERSAL (For G-10f Coolers Only)
11
reversible door exchange
7.The terminals of door LED lights wiring is taken out from
door's reserved hole then get through hinge axie connect
6.draw out the hinge axis from right bottom hinge, insert
it into left bottom hinge.
3.disassemble the right upper hinge, then remove the
door.
1.disassemble the the hinge latch of left hand door.
2. disassemble the front grill, disconnect the terminals,
then hide the terminals into door's reserved hole.
4.draw out the structure of self-‐closing door,then
assemble the structure into door other side .
5.clockwise rotate the door 180°.
No.
change
Correction:
38 Electric Box Cover
47 Upper Compressor Baseboard
Delete clause 1 in the left and adjust the
rest clause Seiral No and content as below:
1.Remove the front grill, disconnect the
terminals and then hide the terminals in
the door's reserved hole.
2.Remove upper hinge and bottom door
limit,then remove the door.
remark: please add the above picture under
the No1 picture.
5
G10F/12F manual modification
1
2
Cancel the 2 holes for LED light switches
with labelling because the (2) LED light
switched are moved to compressor room back
3.Take out the torsion rod from the upper
of the door right
4.Fish out the wiring from door frame
cavity, the wiring stretches out from the
upper of door right.
5.Insert the torsion rod into corresponding
holes on bottom right of the door.
6.Rotate the door clockwise 180°(Now the
wiring is stretching out from the bottom
