background image

Instruction Manual

13

TROUBLESHOOTING

The following are not Malfunctions:

Issues

Solutions

Liquid fl owing noise within cooler

This liquid is the sound of the cooling agent fl owing through the pipes.

Refrigeration system is shutdown for 

longer periods of time while temperature 

inside is still very low.

This refrigerator has a strong level of heat preservation and can main-

tain a relatively ambient temperature.

Condensation on glass door

This may be due to a high indoor humidity or a low inside temperature 

value may be set. Wipe the door dry with a towel.

1

   This refrigerator has been designed and manufactured according to National standards. If there are any questions 

during use, refer to this operation manual to help troubleshoot problems.

2

   When disposing of the cooler, please remove the door and lock assembly to avoid children accidentally becoming 

trapped inside the cooler.

AFTER SALES SERVICE

Any product has the possibility of malfunction. Please observe the cooler’s operation and any changes to product being 

stored. If there are any abnormal cases, refer to the table below. If there is still no change after following the below 

instructions, please inform our service center in a timely manner to avoid a further loss of the unit.

Issues

Solutions

Cooler is not functioning.

Please check power supply:

•  Fuse damage

•  The plug is not securely inserted into the wall socket

•  Check for low voltage

Cooler is not keeping product cool.

•  Provide ample space between all products to ensure proper 

circulation of air.

•  Keep unit away from direct sunlight or other heating source.

•  Keep door closed as often as possible.

•  Be certain cooler is not touching external objects or walls.

Excessive noise

•  Be certain the cooler is placed on a level surface.

•  Be certain cooler is not touching external objects or walls.

Correct Disposal of this product

This marking idicates that this product should not be disposed of with other household 

waste throughout the EU. To prevent possible harm to the environment or human health due 

to uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of 

material resources. To return your used device, please use the return and collections system, 

or contact the retailer where the product was purchased for instructions on disposal.

Summary of Contents for G-10





















Reviews: