Shenzhen IDUTEX Tech Co., Ltd
7
Press the Power Switch rearward to activate the tip with a negative
voltage. The Blue LED should light and the LCD display will read the
“0.0V” (ground).
Your tool is working correctly and is now ready for use. (Figure 2)
Figure
IMPORTANT
:
When powering-up components, you can
increase the life of power switch in the tool if you first press the
switch, then contact the tip to the component. The arcing will take
place at the tip instead of the contacts of the switch.
2.7 Circuit Breaker
The tool is short-circuit protected. Its internal circuit breaker will trip if
it becomes overloaded. The circuit breaker is a valuable test tool as well
as a safety measure to protect the tool from overload.
When circuit breaker tripped, All other functions of the tool are still active,
which means you can still probe a circuit and observe the voltage reading.
When the circuit breaker is tripped, the tool will NOT be able to conduct
2