B5U033000E
Page 23 of 54
Sub-Index
Parameter
Description
05h
Q Value
The Q value used in fixed Q selection algorithm or the starting Q
value used in dynamic Q selection algorithm as defined in EPC Class
1 Generation 2 protocol (0
… 15).
06h
Q Initial
The minimum allowed Q value in dynamic Q selection algorithm
mode (0 … 15)
07h
Q Final
The maximum allowed Q value in dynamic Q selection algorithm
mode (0 … 15)
08h
Q Adjust
Rounds
The maximum Q adjust rounds in dynamic Q selection algorithm
mode (0 … 5)
09h
Inventory
Cycles
The inventory cycles in inventory command (0 … 5).
0Ah
Session
The session used as defined in EPC Class 1 Generation 2 protocol:
•
0x00: S0
•
0x01: S1
•
0x02: S2
•
0x03: S3
0Bh
Target
The target used as defined in EPC Class 1 Generation 2 protocol:
•
0x00: A
•
0x01: B
0Ch
EPC size
The size of the recognized EPC in bytes. 0, 2, 4, … 62. 0 means all
EPC sizes.
0Dh
ReadAfterDete
ct Password
The password to be used to access to tag’s memory in
ReadAfterDetect mode (Inventory Mode = Standard Single/Multi Tag
with Custom Info). Use a ‘0’ password if the access password is not
requested.
0Eh
ReadAfterDete
ct Bank
The tag’s memory bank to access in ReadAfterDetect mode
(Inventory Mode = Standard Single/Multi Tag with Custom Info):
•
0x00: Reserved
•
0x01: EPC
•
0x02: TID
•
0x03: User
0Fh
ReadAfterDete
ct Address
The tag’s memory start address to access in the specified memory
bank in ReadAfterDetect mode (Inventory Mode = Standard
Single/Multi Tag with Custom Info).
10h
ReadAfterDete
ct Length
The number of tag’s memory blocks (2
-bytes length) to access in the
specified memory bank in ReadAfterDetect mode (Inventory Mode =
Standard Single/Multi Tag with Custom Info). In case of Reserved or
User bank selected 0 means no tag’s memory block a
ccess, in case
of TID bank selected 0 means auto-length (class identifier,
manufacturer identifier, serial number).
11h
ReadAfterDete
ct Flags
The tag’s info (PC, EPC, CRC) to include in the tag’s ID in
ReadAfterDetect mode (Inventory Mode = Standard Single/Multi Tag
with Custom Info). A byte whose bits are dedicated to disable (0
value) or enable (1 value) functions: