8
Quick Installation Guide
4.2 System Initialization
You have to initialize the
505R/FINGER007
series
unit prior to the installation
.
Once power is supplied to the
505R/FINGER007
series
, press down the initialization switch on the back of the
505R/FINGER007
series
unit. Keep it down for about 3 seconds until you see the display shown below. Press number
1 key to initialize the device. Otherwise, press number 0.
Figure: The Position of Initialization Switch
○
1 Press the key <1> if you wish to initialize the
505R/FINGER007 series
.
○
2 Initialization will be processed.
○
3 The device will reboot automatically when finished with initialization. (
You do not need to reapply power.)
CAUTION: When initialization is fully completed, all of the existing data will be deleted.
○
1
SYSTEM INIT.
1 – YES, 0 - NO
○
2
WAITING !!!
○
3
INIT. OK !!!
Initialization Switch
