IDTECK SRK101V, User Manual

Page: 9 / 21

p.6
Product introduction
2. Keypad Used to enter the ID/password.
3. Tamper Switch A tamper switch to detect falling from the wall.
4. Connection Cable Used to connect to the power or I/O cable.
5. Buzzer Piezo buzzer.
6. Fixing Hole Fixing hole for wall-mounting.
4 Cable color scheme
Item Cable color Signal Line Description
Power Red DC + 12V Power (+12V)
Black GND Earth-grounding for power
Output Green WIK_DATA0 Wiegand Data 0 Output Port
White WIK_DATA1 Wiegand Data 1 Output Port
Purple TX_OUT RS-232 Output Terminal
Not used Orange Not used Not used.
Brown Not used Not used.
Input Yellow Green LED control Green LED Control Input Terminal
Gray Orange LED Control Orange LED Control Input Terminal
Blue Buzzer Control BUZZER Control Input Port
Tamper Pink Tamper (COM) COM Port of Tamper Switch
Light yellow Tamper (NC) NC Port of Tamper Switch
RS-232 GND Black GND GND
5 Cable selection
Item Cable type
Power (DC12V) Belden #9409, 18 AWG 2 Conductor, Unshielded
Card/PIN data (Wiegand)
Control Signal (LED,BUZZER)
TAMPER
Belden #9512, 22 AWG 4 Conductor, Shielded
Belden #9514, 22 AWG 8 Conductor, Shielded
RS-232 Cable Belden #9829, 24 AWG 2-twisted pair, Shielded