5
5. Specifications
6. Installation
6-1. Drilling Screw Holes
Drill two 6-32 or M3 screw holes at 3.3" (8.38cm) intervals vertically.
Then, drill one 1/2" hole between previously drilled two holes. (Look at the figure: Installation Layout.)
6-2. Fixing the Reader Module
Put the reader cable into the center hole and fix the reader module using two 6-32 or M3 screws.
6-3. Putting the Cover
Put the cover on the device and push it until it clicks into place.
CPU
8bit Microprocessor
Frequency
13.56MHz
Read Range
ISC80S : Up to 4 inch(10cm)
Reading Time (Card)
Less than 1s
Power / Current
DC 12V, Max. 100mA
Input Port
2ea(External LED Control, External Buzzer Control)
Output Format
34 bit Wiegand & RS232 (Default)
With PRG2000S, various Wiegand & ABA Track II Output Programmable
LED Indicator
3 Array LED Indicator (Red and Green)
Beeper
Piezo Beeper
Keypad
N /A
Operating Temperature
-35
℃
to +65
℃
(-31
℉
to 149
℉
)
Operation Humidity
10 to 90% RH relative humidity non-condensing
Color
Dark Peal Gray
Material
Polycarbonate
Dimension
(W x H x T)
1.8” x 4.5” x 0.88” (47mm x 115mm x 22mm)
Weight
150g (0.33lbs)
Index of Protection
IP65, IP66(SR10SE)
Certification
FCC, CE, KCC(MIC)