16
December. 2016 Copyright IDTECK Co., Ltd
.
User Manual
10-11
Power off the device, and disconnect yellow and white cables (If used switch, simply turn OFF the
switch).
10-12
Power on the device. You can now scan the tag from the distance that has been programmed.
Scenario
-
Current reading range is 2 meters, and you want to maximize the reading range. How?
1)
Follow the steps above (5-6 and 5-7).
2)
Wait until green LED turns off (DO NOT scan any tag until it fully goes off).
3)
Follow the steps (5-9 to 5-10). Recognition distance shall be set with the maximum reading
range.
※ Note:
1. Reading range can have a margin of error that depends on installation circumstances.
2. The default reading range of NEO RF245 is set to maximum.
(Reading Range is definable according to each site's properties.)
