15
December. 2016 Copyright IDTECK Co., Ltd
.
User Manual
10-8
Power up NEO RF245.
10-9
Green and red LED will light up as shown below. The device will generate 10 beeping sounds for 10
seconds.
10-10
During those 10 seconds, scan a tag from a desired location. The tag should be scanned 10 straight
times. For the first 5 times of the scanning, a single sound (Bee) will be generated. From the 6
th
to 9
th
times of scanning, double sound (Bee Beep) will be generated. At the last 10
th
time of scanning, triple
sound (Bee Bee Beep) will be generated. Now the distance of that 10
th
time of scanning will be
programmed as a new reading distance. When finished, the reading range setup will be finalized and
green LED will turn off.
