IDTECK iTDC Quick Installation Manual Download Page 9

Page: 9 / 24

Quick Installation Guide

2-DOOR CONTROL

Wires of an exit button can be connected to Input and GND with no distinction (one wire to input, the other to GND).

Door 1

Exit Button

Connect one wire to Input#1 of iTDC/iTDC-SR main board.
Connect the other wire to Input#1 GND of iTDC/iTDC-SR main board.

Door Contact

Connect one wire to Input#2 of iTDC/iTDC-SR main board.
Connect the other wire to INPUT#2 GND of iTDC/iTDC-SR main board.

Door 2

Exit Button

Connect one wire to Input#3 of iTDC/iTDC-SR main board.
Connect the other wire to Input#3 GND of iTDC/iTDC-SR main board.

Door Contact

Connect one wire to Input#4 of iTDC/iTDC-SR main board.

Connect the other wire to Input#4 GND of iTDC/iTDC-SR main board.

3-DOOR CONTROL

Attach I/O board(EIO88) to iTDC/iTDC-SR before wiring. Door 1 is controlled by main board of iTDC/iTDC-SR

and door 2 and 3 are controlled by I/O board (EIO88).

Door 1

Exit Button

Connect one wire to Input#1 of iTDC/iTDC-SR main board.
Connect the other wire to Input#1 GND of iTDC/iTDC-SR main board.

Door Contact

Connect one wire to Input#2 of iTDC/iTDC-SR main board.

Connect the other wire to Input#2 GND of iTDC/iTDC-SR main board.

Door 2

Exit Button

Connect one wire to Input#1 of EIO88.

Connect the other wire to Input#1 GND of EIO88.

Door Contact

Connect one wire to Input#2 of EIO88.

Connect the other wire to Input#2 GND of EIO88.

Door 3

Exit Button

Connect one wire to Input#3 of EIO88.

Connect the other wire to Input#3 GND of EIO88.

Door Contact

Connect one wire to Input#4 of EIO88

Connect the other wire to Input#4 GND of EIO88.

4-DOOR CONTROL

Attach I/O board(EIO88) to iTDC/iTDC-SR before wiring. Door 1 and 2 are controlled by main board of
iTDC/iTDC-SR and door 3 and 4 are controlled by I/O board (EIO88).

Door 1

Exit Button

Connect one wire to Input#1 of iTDC/iTDC-SR main board.

Connect the other wire to Input#1 GND of iTDC/iTDC-SR main board.

Door Contact

Connect one wire to Input#2 of iTDC/iTDC-SR main board.

Connect the other wire to Input#2 GND of iTDC/iTDC-SR main board.

Door 2

Exit Button

Connect one wire to Input#3 of iTDC/iTDC-SR main board.
Connect the other wire to Input#3 GND of iTDC/iTDC-SR main board.

Door Contact

Connect one wire to Input#4 of TDC/iTDC-SR main board.

Connect the other wire to Input#4 GND of iTDC/iTDC-SR main board.

Door 3

Exit Button

Connect one wire to Input#1 of EIO88.

Connect the other wire to Input#1 GND of EIO88.

Door Contact

Connect one wire to Input#2 of EIO88.
Connect the other wire to Input#2 GND of EIO88.

Door 4

Exit Button

Connect one wire to Input#3 of EIO88.

Connect the other wire to Input#3 GND of EIO88.

Door Contact

Connect one wire to Input#4 of EIO88.

Connect the other wire to Input#4 GND of EIO88.

Summary of Contents for iTDC

























Search results

Summary of Contents for iTDC

Reviews:

Related manuals for iTDC

Brands by name

Popular brands

IDTECK iTDC, Quick Installation Manual

Search results

Summary of Contents for iTDC

Reviews:

Related manuals for iTDC

Brands by name

Popular brands