ViVOpay VP6300 User Manual
16
3.2
Parts List
Verify that you have the following hardware for the installation of the ViVOpay VP6300:
ViVOpay VP6300 P/N SPTP2‐988‐33‐2C‐0C or SPTP2‐988‐33‐2CD‐0C.
(Optional) ViVOpay VP6300 NFC Antenna P/N ID‐80152002‐001 or ID‐80152002‐002. You will
need this item, and its cable (P/N 80136204‐001), if you will be using VP6300's contactless
(NFC) capabilities.
USB cable P/N 80152210‐001, or RS‐232 cable P/N 80152211‐001.
Power supply P/N 140‐2035‐00.
3.3
Installation of Reader
Refer to the VP6300 drawing shown further above (
Overall Layout
). Verify that power cords can
physically reach the unit. Then proceed to:
Locate, mark, and drill 0.20‐in. holes for the main mounting points of the unit, spaced 67 mm
apart lengthwise (on center), and spaced 55 mm apart (on center) along the shorter axis. Use
a #12 drill.
