ViVOpay VP3300BT User Manual
Page | 8
4.
Battery Charging Instructions
The VP3300BT is powered by a lithium ion polymer battery and is delivered in a partially charged
state. Make sure to fully charge the battery before using the VP3300BT for the first time. Allow 4-
6 hours for the initial charge.
Use the included USB to micro-USB cable to charge the unit. An LED battery indicator displays
current battery charging status; see the
LED Display for Power Management
section for details.
4.1.
Electrical Power
Run mode
54.6mA
Low Power mode
2.35~5.5mA
Contact
<90mA
Contactless
< 400mA
Magnetic stripe transaction
< 90mA
Off mode
2.5uA
4.2.
Battery Life
72-hour standby, including 100 EMV transactions, 100 MSR transactions, and 100 NFC
transactions from full battery until unit shuts off.
4.3.
LED Display for Power Management (Bottom LED)
•
The back-middle LED displays solid red: Battery is charging.
•
The back-middle LED flashes amber and green: Battery power is low. Charge the battery
or connect the VP3300BT to a power source. The VP3300BT remains fully functional
when connected to a power source.
•
The back-middle LED turns off when connected to a power source: Battery is fully
charged.
