ViVOpay Kiosk III User Manual
Page 11 of
24
7.
Align the four screws with the mounting holes and attach the ViVOpay Kiosk III to the
outside surface. Make sure that the cable is not pinched or binding.
8.
Use the four nuts to secure the ViVOpay Kiosk III to the outside surface of the kiosk.
Make sure to tighten the nuts securely so that the ViVOpay Kiosk III does not move on
the outside surface of the kiosk.
If you are installing the Angled Bezel Antenna, tighten the nuts to 5-7 in/lbs. for a good
weather seal.
9.
Attach the end of the cable with the SMB connector through the right 14.0 mm (0.551
inch) hole and attach it to the socket on the back of the ViVOpay Kiosk III antenna. The
SMB connector pushes on to the socket on the antenna.
Angled Bezel
Antenna
Standard Bezel
Antenna