ViVOpay BTPay Mini UserManual
4
When BTPay Mini is ready to tap card,
the first Green LED will be solid.
Tap the card on BTPay Mini, if reading
card success, all four LEDs will blink
once with one long beep; if reading card
failure, only two short beeps be sounded.
Once approval, the app will show
“MSR
Card tapped/Swiped Successfully
” to
complete the transaction.
2 Firmware Upgrade
The BTPay Mini can be upgraded using either the serial or USB interfaces.
2.1 Preparation
To update the new firmware you will need:
•
PC with available serial or USB port
•
BTPay Mini unit
•
USB to Micro USB B type cable
•
BTPay Mini firmware update tool
•
Firmware file for the desired firmware
2.2 Procedure
1. Copy the BTPay Mini update tool and firmware on the PC.
2. Plug in the micro-USB B type cable to BTPay Mini, connect the USB
cable to PC USB port.
3. There should be no beep, and all four LEDs blink once.
4. Launch the BTPay Mini firmware update tool.
