background image

 

ViVOpay BTPay Mini UserManual 

 
 
 
 

iii 

 

FCC Regulatory Compliance 

Notices Class B Equipment 

This equipment has been tested and found to comply with the limits for a Class B digital device 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment generates, 
uses, and can radiate radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. This device complies with 
part 15 of the FCC rules. Operation is subject to two conditions: (1) This device may not cause 
harmful interference, and (2) this device must accept any interference received, including 
interference that may cause undesired operation.

 

If this equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try and correct the 
interference by one or more of the following measures:

 

  Reorient or relocate the receiving antenna.  

  Increase the separation between the equipment and the receiver. 

  Connect the equipment into an outlet on a circuit different from that  to which the receiver is 

connected.  

  Consult the dealer or an experienced radio/TV technician for help.  

Changes or modifications to the ViVOpay BTPay Mini not expressly approved by ViVOtech 
could void the user's authority to operate the ViVOpay BTPay Mini. 
 

RF exposure: 

  To comply with the FCC RF exposure compliance requirements, this device and its antenna 

must not be co-located or operating in conjunction with any other antenna or transmitter. 

 

Cautions and Warnings 

 

Caution: 

The ViVOpay BTPay Mini should be mounted 1-2 feet away from other 

ViVOpay BTPay Mini. 

 

 

Caution: 

Danger of Explosion if battery is incorrectly replaced. Replace only with 

same or equivalent type recommended by the manufacturer. Discard used batteries 
according to the 

manufacturer’s instructions.

 

 

Warning: 

Avoid close proximity to radio transmitters which may reduce the ability of 

the reader.

 

 

 

 

Summary of Contents for ViVOpay BTPay Mini














Reviews: