IDTECH SmartPIN L100, User Manual

Page: 36 / 76

Page | 36
Response Body: 06 + PIN DUKPT PIN Master Key PIN Session Key Status
+ Account DUKPT Key AccountDUKPT Key RKI-KEK (Admin DUKPT Key)
Where:
Key Status Note
PIN Encryption Key
0: None.
1: Exist 0xFF: STOP
PIN Master Key 0: None
1: At least Exist a
Master Key
PIN Session Key 0: None.
1: Exist
Account/MSR DUKPT Key
0: None.
1: Exist 0xFF: STOP
Does not support this key.
Always 0
Account/ICC DUKPT Key
0: None.
1: Exist 0xFF: STOP
Does not support this key.
Always 0
RKI-KEK (Admin DUKPT
Key)
0: None.
1: Exist 0xFF: STOP
If the L100 has not been key-injected, response looks like 02070006000000000000060603
8.8.10 Set Remote Key Injection Timeout
Command Body: 78 53 01 01 02 <Timeout_H> <Timeout_L>
Command Example
STX Len
Low
Len
High
Command Body LRC CHK
SUM
ETX
02 07 00 78 53 01 01 02 00 C0 E9 8F 03
Output Hex String: 020700785301010200c0e98f03
In this example, the timing value is 0x00C0 or 192 (decimal) seconds. Timeout_H Timeout_L needs to be in the
range 120 seconds ~ 3600 seconds
Response Body:
06 (Full response string: 02010006060603)