Copyright © 2019, International Technologies & Systems Corp. All rights reserved.
Page 6 of 24
1.0
Introduction
ID TECH’s SmartPIN K100 3.X is a PCI 3.X certified, ruggedized PIN-entry device designed for
use in vending and ATM environments. The 4x4, 16-key layout is a familiar format seen on other
unattended payment devices and is specifically designed to meet applicable ADA, ANSI, and ISO
standards. The unit's IP65 rating makes it ideal for outdoor environments.
This document provides technical information for integrating the K100 into typical deployment
environments. In addition to physical and electrical information, this document presents firmware
API specifications for communicating with the K100 via (for example) USB-HID.
The low-level (firmware) commands are applicable using either the USB-HID or RS232 interface.
•
For RS232 interface, the default COM parameters are: 38400, 8, 1, none.
•
For USB, the VID is 0xACD and the PID is 0x0850.
2.0
Features
•
PCI 3.X Certified
•
4x4 keypad layout
•
LED on back of unit for unit status
•
Meets ADA, ANSI, and ISO standards for PIN Entry Devices
•
Optional audible feedback
•
Drop in replacement for the SmartPIN K100 2.X
•
Gasket for watertight mounting
•
IP65 rating
•
Removal detection and tamper responsive
•
Low Power consumption mode
•
Supports TDES encryption with DUKPT key manangement
•
Supports serial communication via RS232 or USB-HID
