IDTECH SmartPIN K100 3.X, Technical Reference Manual

Page: 18 / 24

Copyright © 2019, International Technologies & Systems Corp. All rights reserved.
Page 18 of 24

The process is:

Step2.1 Press Default Loading Key Password once and device will beep
Complete Tone
.
(If the first numeric key is pressed, Device will stop Always beeps).

Step2.2 Press New Password first times, and device will beep Complete Tone . (New
Password need not be same as Default Loading Key Password.)

Step2.3 Press New Password second time, and device will beep Complete Tone .

If the password is modified successfully, Device beeps Complete Tone and the New
Password is a User Loading Key Password.

If another Password is Default Loading Key Password, beeper will beep always. Then User need
not Re-Power on device (unplugging device) and can do above Process (Step2.1 ~ Step 2.3) to
modify another Default Password.

If 2 Password all be modified to User Activation Password; device quits “Want Loading Key
State”.

Interval limits:

The Interval between Password1 and Password2 is 20 seconds.

The Interval between the two keys of a password is 10 seconds.

Any key will have a short tone to be the acknowledgement tone.
Step3. Press User Activation Key Password

If the User presses 2 User Loading Key Passwords

A User Password is pressed correctly, Device beeps Normal Tone

Another User Password is pressed correctly, Device beeps
Normal Tone

Device confirms 2 User Passwords correct:

If Device is not Fixed and IN Removal State : Device beeps Device is Removal Tone and
quit “Want Fix / Removal Device State”.

If Device is Fixed and IN Removal State : Device beeps Complete Tone , Active Fix
Device successfully, save 2 Records for Active Fixed Device, and quit “Want Fix /
Removal Device State”.

If Device is Fixed and
IN Fixed State
: Device beeps
Device IN Fixed State Tone
and quit
“Want Fix / Removal Device State”.

If the User presses at least an incorrect User Activation Password, Device beeps Invalid Tone
and the User can presses again.

If the User presses incorrect User Activation Password 3 times, Device beeps Invalid Tone and
Suspend 3 Minutes. After Device finished suspend, Device quit “Want Fix / Removal Device
State”.

Interval:

The Interval between Password1 and Password2 is 2 Minutes.

The Interval between the two keys of a password is 10 Seconds.
7.5 Activate Removal of Device (Legally, via Password)
Step1. Power On device, after device beeps Normal Tone , please press Cancel , Back , Enter , Help ,
Cancel , and Help (6 keys). The interval between the two keys need be at most 5 seconds.

If Log of Fix and Removal is full, Device Beeps Invalid Tone and quit “Want Fix / Removal
Device State”.

If there is at least a Default Activation Password in device.